Product Description
GICLZ Drum Gear Coupling(JB/T8854.3-2N.m, the axle hole combination has: Y/J1, J1/J1 and Y/Y, and G 1 CLZ type drum gear coupling is suitable for the 2 ends of the 2 axle ends which are far away from each other.
Main Dimension And Parameter(JB/T8854.3-2001)
| Type | Nominal Torque kN·m |
Allow Speed rpm |
Bore Diameter d1,d2 |
Bore Length Y,L |
D | D1 | D2 | D3 | B1 | C | Rotary Inertia kg·m2 |
Mess kg |
| mm | ||||||||||||
| GICLZ1 | 0.008 | 7100 | 16,18,19 | 42 | 125 | 95 | 60 | 80 | 57 | 24 | 0.0084 | 5.4 |
| GICLZ2 | 1.400 | 6300 | 25,28 | 62 | 145 | 120 | 75 | 95 | 67 | 16 | 0.018 | 9.2 |
| GICLZ3 | 2.800 | 5900 | 30,32,35,38 | 82 | 170 | 140 | 95 | 115 | 77 | 7 | 0. 0571 | 16.4 |
| GICLZ4 | 5.000 | 5400 | 32,35,38 | 82 | 195 | 165 | 115 | 130 | 89 | 19 | 0.076 | 22.7 |
| GICLZ5 | 8.000 | 5000 | 40,42,45,48,50,55,56 | 112 | 225 | 183 | 130 | 150 | 99 | 9.5 | 0.0149 | 36.2 |
| GICLZ6 | 11.200 | 4800 | 48,50,55,56 | 112 | 240 | 200 | 145 | 170 | 109 | 11.5 | 0.24 | 46.2 |
| GICLZ7 | 15.0 | 4500 | 60,63,65,70,71,75 | 142 | 260 | 230 | 160 | 195 | 122 | 10.5 | 0.43 | 68.4 |
| GICLZ8 | 21.2 | 4000 | 65,70,71,75 | 142 | 280 | 245 | 175 | 210 | 132 | 12 | 0.61 | 81.1 |
| GICLZ9 | 26.5 | 3500 | 70,71,75 | 142 | 315 | 270 | 200 | 125 | 142 | 18 | 0.94 | 100.1 |
| GICLZ10 | 42.5 | 3200 | 80,85,90,95 | 172 | 345 | 300 | 220 | 250 | 165 | 14 | 1.67 | 147.1 |
| GICLZ11 | 60.0 | 3000 | 100,110,120 | 212 | 380 | 330 | 260 | 285 | 180 | 14 | 2.98 | 206.3 |
| GICLZ12 | 80.0 | 2600 | 120 | 212 | 442 | 380 | 290 | 325 | 208 | 14 | 5.31 | 284.5 |
| GICLZ13 | 112 | 2300 | 140,150 | 252 | 482 | 420 | 520 | 360 | 238 | 15 | 9.26 | 402.0 |
| GICLZ14 | 160 | 2100 | 160,170,180 | 302 | 520 | 465 | 360 | 410 | 266 | 16 | 15.92 | 582.2 |
| GICLZ15 | 224 | 1900 | 190,200,220 | 352 | 580 | 510 | 400 | 450 | 278 | 17 | 25.78 | 778.2 |
| GICLZ16 | 335 | 1600 | 200,220 | 352 | 680 | 595 | 465 | 500 | 320 | 16.5 | 16.89 | 1071.0 |
| GICLZ17 | 400 | 1500 | 220 | 352 | 710 | 645 | 495 | 530 | 336 | 17 | 60.59 | 1210 |
| GICLZ18 | 500 | 1400 | 240,250,260 | 410 | 775 | 675 | 520 | 540 | 351 | 16.5 | 81.75 | 1475 |
| GICLZ19 | 630 | 1300 | 260 | 410 | 815 | 715 | 560 | 580 | 372 | 17 | 101.57 | 1603 |
| GICLZ20 | 710 | 1200 | 280,300,320 | 470 | 855 | 755 | 585 | 600 | 393 | 20 | 140.03 | 2033 |
| GICLZ21 | 900 | 1100 | 300,320 | 470 | 915 | 795 | 620 | 640 | 404 | 20 | 183.49 | 2385 |
| GICLZ22 | 950 | 950 | 340,360,380 | 550 | 960 | 840 | 665 | 680 | 415 | 20 | 235.04 | 2452 |
| GICLZ23 | 1120 | 900 | 360,380 | 550 | 1571 | 890 | 710 | 720 | 435 | 20 | 323.16 | 3332 |
| GICLZ24 | 1250 | 875 | 380 | 550 | 1050 | 925 | 730 | 760 | 445 | 22 | 387.97 | 3639 |
| GICLZ25 | 1400 | 850 | 400,420,450,480,500 | 650 | 1120 | 970 | 770 | 800 | 465 | 22 | 485.96 | 4073 |
| GICLZ26 | 1600 | 825 | 420,450,480,500 | 650 | 1160 | 990 | 800 | 850 | 475 | 22 | 573.64 | 4527 |
| GICLZ27 | 1800 | 800 | 450,480,500 | 650 | 1210 | 1060 | 850 | 900 | 479 | 22 | 789.74 | 5485 |
| GICLZ28 | 2000 | 770 | 480,500 | 650 | 1250 | 1080 | 890 | 960 | 517 | 28 | 960.26 | 6050 |
| GICLZ29 | 2800 | 725 | 500 | 650 | 1340 | 1200 | 960 | 1571 | 517 | 28 | 1268.98 | 7090 |
| GICLZ30 | 3500 | 700 | 530,560,600,630 | 800 | 1390 | 1240 | 1005 | 1070 | 525 | 28 | 1822.02 | 9264 |
♦Product Show
♦Other Products List
| Transmission Machinery Parts Name |
Model |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Company
HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.
Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.
♦Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.
2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.
4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.
5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.
♦FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.
Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.
Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.
Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.
Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.
Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.
Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.
Q 9: What’s your payment?
A:1) T/T.
♦Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
What Are the Maintenance Requirements for Rigid Couplings?
Rigid couplings are known for their simplicity and low maintenance requirements. Since they do not have moving parts or flexible elements, there are minimal wear and tear issues. However, some maintenance considerations for rigid couplings include:
1. Regular Inspection: It is essential to perform periodic inspections of the rigid couplings to check for any signs of wear, damage, or misalignment. Regular inspections can help identify potential issues early and prevent further problems.
2. Shaft Alignment: Proper shaft alignment is critical for rigid couplings. During installation or whenever maintenance work is performed on the connected machinery, the shaft alignment must be checked and adjusted if necessary. Misalignment can lead to premature coupling failure and cause additional stress on connected equipment.
3. Lubrication: Most rigid couplings do not require lubrication since they have no moving parts. However, some special designs or large-sized couplings may have set screws or other fasteners that require lubrication. It is essential to follow the manufacturer’s guidelines regarding lubrication, if applicable.
4. Corrosion Protection: In corrosive environments, protecting the rigid couplings from corrosion is crucial. This can be achieved through the use of corrosion-resistant materials or coatings.
5. Periodic Re-tightening: If the rigid coupling uses set screws or other fasteners, periodic re-tightening may be necessary to maintain the integrity of the connection. This is particularly important in applications with high vibrations or heavy loads.
6. Temperature Considerations: Rigid couplings may experience thermal expansion or contraction, especially in high-temperature environments. It is essential to consider the thermal expansion characteristics of the coupling material and the connected shafts to ensure proper functioning under varying temperatures.
7. Professional Maintenance: In complex systems or critical applications, it is advisable to seek professional maintenance and alignment services. Expert technicians can ensure proper installation, alignment, and maintenance of rigid couplings, reducing the risk of unexpected failures.
Overall, rigid couplings are designed for reliability and longevity, and proper maintenance practices can further enhance their performance and lifespan. Regular inspections and alignment checks are vital for identifying and addressing potential issues before they escalate into costly problems.
Factors to Consider When Choosing a Rigid Coupling for a Specific System
Choosing the right rigid coupling for a specific system is crucial to ensure proper functionality and reliable performance. Several factors should be considered when making this decision:
1. Shaft Size and Compatibility: The most fundamental factor is ensuring that the rigid coupling is compatible with the shaft sizes of the connected components. The coupling should have the appropriate bore size and keyway dimensions to fit securely onto the shafts.
2. Operating Torque: Consider the torque requirements of the application. The rigid coupling should have a torque rating that exceeds the maximum torque expected during operation to prevent failures and ensure safety.
3. Speed: Determine the rotational speed (RPM) of the connected shafts. Rigid couplings have maximum RPM limits, and the selected coupling should be capable of handling the system’s operating speed.
4. Misalignment Tolerance: Assess the potential misalignment between the shafts. Rigid couplings provide no flexibility, so the system must have minimal misalignment to prevent excessive forces on the components.
5. Temperature and Environment: Consider the operating temperature range and the environment where the coupling will be used. Ensure the chosen material can withstand the temperature and any corrosive or harsh conditions present.
6. Space Limitations: Evaluate the available space for the coupling. Rigid couplings have a compact design, but ensure that there is enough clearance for installation and maintenance.
7. Backlash and Torsional Stiffness: In some precision systems, backlash must be minimized to maintain accurate positioning. Additionally, the torsional stiffness of the coupling can impact system response and stability.
8. Keyway or Keyless Design: Decide between a coupling with a keyway or a keyless design based on the specific application requirements and ease of installation.
9. Material Selection: Consider the material properties of the rigid coupling. Common materials include steel, stainless steel, and aluminum, each with its own advantages and limitations.
10. Maintenance: Determine the maintenance requirements of the coupling. Some couplings may need periodic lubrication or inspections, while others may be maintenance-free.
11. Cost: While cost should not be the sole consideration, it is essential to evaluate the cost-effectiveness of the coupling, taking into account its performance and longevity.
By carefully considering these factors, you can select the most suitable rigid coupling for your specific system, ensuring optimal performance, and longevity of your mechanical setup.
Materials Used in Manufacturing Rigid Couplings:
Rigid couplings are designed to provide a strong and durable connection between two shafts, and they are commonly made from a variety of materials to suit different applications. The choice of material depends on factors such as the application’s environment, load capacity, and cost considerations. Some common materials used in manufacturing rigid couplings include:
- 1. Steel: Steel is one of the most widely used materials for rigid couplings. It offers excellent strength, durability, and resistance to wear. Steel couplings are suitable for a wide range of applications, including industrial machinery, automotive systems, and power transmission.
- 2. Stainless Steel: Stainless steel couplings are used in applications where corrosion resistance is crucial. They are well-suited for environments with high humidity, moisture, or exposure to chemicals. Stainless steel couplings are commonly used in food processing, pharmaceuticals, marine, and outdoor applications.
- 3. Aluminum: Aluminum couplings are known for their lightweight and corrosion-resistant properties. They are often used in applications where weight reduction is essential, such as aerospace and automotive industries.
- 4. Brass: Brass couplings offer good corrosion resistance and are commonly used in plumbing and water-related applications.
- 5. Cast Iron: Cast iron couplings provide high strength and durability, making them suitable for heavy-duty industrial applications and machinery.
- 6. Bronze: Bronze couplings are known for their excellent wear resistance and are often used in applications involving heavy loads and low speeds.
- 7. Plastics: Some rigid couplings are made from various plastics, such as nylon or Delrin. Plastic couplings are lightweight, non-conductive, and suitable for applications where electrical insulation is required.
It’s essential to consider the specific requirements of the application, including factors like load capacity, operating environment, and cost, when choosing the appropriate material for a rigid coupling. The right material selection ensures that the coupling can withstand the forces and conditions it will encounter, resulting in a reliable and long-lasting connection between the shafts.
editor by CX 2024-04-25
by
Leave a Reply